You are here: www.stahlfasern.de » English Edition » Abrasives » The products » Stainless abrasives

Stainless abrasives – the safe solution for noble metals

Krampe can also supply specific-effect abrasives for processing the surfaces of stainless steel and sensitive non-ferrous metals. Stainless cut wire pellets and stainless steel shot from Krampe achieve excellent results in the cleaning of castings. These products can be used in both shot blasting wheel and airblast equipment.

Abrasive type
Cylindrical stainless cut wire pellets
Conditioned stainless cut wire pellets
DIN 8201/ISO 11124-1/SAE J441
Application
Fettling, blast-cleaning, deburring
Chemical analysis
1.4301/AISI 304
1.4310/AISI 301
1.4401/AISI 316

Other materials on request
Particle sizes
0.3 mm/0.4 mm/0.5 mm/0.6 mm/
0.7 mm/0.8 mm/0.9 mm/1.0 mm/
1.2 mm/1.6 mm/2.0 mm/2.5 mm

Other particle sizes on request
Packaging
25 kg PE bags or canisters on pallets of 1,000 kg

200 l metal drums of 800 kg

BIG BAG of 500/1,000 kg
Abrasive type
Stainless steel shot
DIN 8201/ISO 11124-1/SAE J441
Application
Blast-cleaning, deburring
Chemical analysis
C: ~ 0.2 %
Ni: ~ 10.0 %
Cr: ~ 18.0 %
Si: ~ 2.0 %
Mn: ~ 1.0 %
Particle sizes
0.05–0.20 mm
0.70–1.25 mm
0.09–0.30 mm
1.00–1.40 mm
0.14–0.50 mm
1.25–1.70 mm
0.40–0.80 mm
1.40–2.00 mm
0.60–1.00 mm
1.70–3.00 mm
Packaging
25 kg PE bags or canisters on pallets of 1,000 kg

200 l metal drums of 800 kg

BIG BAG of 500/1,000 kg